TAPI for Snom - Feature History

Version  New functions, changes, bug fixes


1.0.055:
06.06.2018
  • Under the tab "More" the "Call answer via Headset" can be activated.
  • Direct transition IDLE => CONNECTED: It may be a pickup or the snom is on auto-answer. If the Snom is on "Auto-Answer", it may be that the "connected" arrives first, followed immediately by "incoming". The CONNECTED event is therefore reported delayed, so that an intermediate "incoming" is processed first.
1.0.054:
26.01.2018
  • BugFix: After linePickup() the pickup call was not displayed via TAPI.
1.0.053:
12.07.2017
  • New mode "Action URLs are already configured in the phone". Thus, LineOpen does not try to set the ActionURLs.
1.0.052:
07.10.2016
  • BugFix: If the parameter dwCallingPartyIDSize/Offset was set when dialing (lineMakeCall), this could trigger a protection violation in the driver. The command lineMakeCall then returned the error message 0xc000000a.
  • BugFix: HTTP passwords with a colon did not work.
  • Dialing a number that starts with #
    • On the "Dial" tab, "Dial by CSTA" can be activated for these numbers.
    • If the Snom telephone does not execute the dial action, it is switched to "CSTA dialing" once.
1.0.051:
24.07.2016
  • Now "key=CANCEL" is used for hangup, instead of "/index.htm?HANGUP=1" to disconnect the headset.
1.0.050:
12.06.2016
  • Adation for transfer in state 'offering'.
  • Numbers starting with * or # are not dialed via CSTA anymore.
  • New parameter m_bNo_PickupLogic. This parameter can only be set directly in snom_lines.xml.
    This parameter can suppress the logic, which is used to identify the caller number for pickup.
  • Display names can be assigned to the identities in the driver.
1.0.049:
08.02.2016
  • Action URL 'received_attended_transfer' is evaluated only for incoming calls.
1.0.048:
17.12.2015
  • The prefix replacement now supports the wildcard '?'.
1.0.047:
29.07.2015
  • Dial via CSTA, when phone number starts with # or *.
  • BugFix: lineDrop after lineMakeCall could be acknowledged with OperationFailed.
  • ActionURL "received_attended_transfer" is evaluated.
  • Snom 720: Display of Call Forwarding / Do Not Disturb for identity1
1.0.046:
26.01.2015
  • Transfer: If the line of subscriber B is monitored, the original caller number is reported at line C.
1.0.045:
21.10.2014
  • In the basic configuration, a space is removed after outside line access code. The TAPI driver only allows the following dialing characters: "+0123456789,;*#".
  • After DISCONNECTED the IDLE is reported with delay (700ms).
  • If "hidden security features" were activated, the Test has displayed "Error Action set URLs!".
1.0.044:
02.09.2014
  • When an admin password is required for setting the Action URLs, this will be queried.
  • If a pickup has been recognized in the multiline driver, for an existing DIALTONE call a IDLE event is reported and then signals a CONNECTED-call as INBOUND.
1.0.041:
30.12.2013
  • BugFix: Error handling, if TCP socket could not be bound to local port.
1.0.040:
08.11.2013
  • Setting the ActionURLs can be suppressed.
  • If necessary, the admin password can be entered in the driver.
1.0.039:
13.09.2013
  • BugFix: Rejected incoming calls were partially still appears as a "calling". The action URL event "missed call" is processed now.
1.0.037:
22.02.2013
  • Action URLs are handled in multiple threads.
1.0.036:
11.09.2012
  • Adaption for Snom firmware 8.7.3.10
  • BugFix: Digest authentication was not working.
1.0.035:
30.08.2012
  • Adaption for Windows 8 x64.
  • The Action URLs are now set in the phone with TAPI line open and deleted with lineClose.
  • Adaption for firmware version 8.7.x: For 'Hold' and 'Transfer' other commands are sent to Snom. For version detection, the test button must be clicked once in driver configuration.
  • Action-URL-Event "received_attended_transfer" is processed for C-Party.
1.0.034:
22.02.2012
  • The caller name is displayed. (display_remote)
1.0.033:
24.01.2012
  • Phone-IP is stored in Action URLs to identify the sender if a router is in use.
  • TAPI-Drop-Call is observed by 3 second timer.
1.0.031:
15.05.2010
  • BugFix: Call forwarding has been reported only for first identity.
  • BugFix: Windows 7 Firewall is automatically configured.
1.0.029:
04.04.2010
  • New: call forwarding and call blocking (DND)
  • New: For the Action URLs can be optionally specified an external computer IP, if the Snom is part of an external network.
  • MAX_LINE_CALLS was increased from 2 to 4, so a third waiting call is displayed.
1.0.028:
17.11.2010
  • Signaling of LINECALLREASON_PICKUP and number, if TAPI driver is installed centrally.
  • BugFix: State errors could occur in case of "call waiting".
  • BugFix: Double "outgoing" events are suppressed.
1.0.026:
14.10.2009
  • Support of pickup
  • Support of lineBlindTransfer.
1.0.022:
22.04.2009
  • Extensions in combination with Snom Firmware 7.3.14:
    • processing of OnHold events.
    • lineSwapHold is supported.
   
DisclaimerData protection